Cost of updating electrical outlets
Most electrical permits require three inspections: rough-in, service, and final.
For our 400A service, we were required to run a single 3" conduit from the green box at our property line to the meter panel on our cabin. We had about 50ft between the green box and our meter panel.As with all wiring, make sure you are only working on dead, de-energized circuits.Check with your local building inspector to determine if any permits are required or inspections.Without the ground connection, you may well be the best or only path to ground, and you can receive a shock.So, for your protection, it is a good thing to have grounded outlets where ever you use anything that comes with the ground prong. as the years went by, standards changed, and while it is not usually required to upgrade your house, it is still a good idea.For installing new electrical service or permanent power in Utah, Rocky Mtn Power requires the owner to route conduit from the power company's source to the service point or meter panel on your house.
The power company, on their dime, installs the conductors, the electric meter, and puts the security seals on the panel.
Maxlite WPL40AU50B (95258) - DLC Listed 40 Watt LED Wall Pack Lighting Fixture - 120-277 Volt - 3480 Lumens - 5000K - LED Wallpack Lighting That Replaces 175 Watt Metal Halide or HPS for Security Lighting, Lighting Pathways and General Area Lighting.
Venture VL1-OR054-40E39-AE00 - 54 Watt - 120/277 Volt - LED for HID Replacement Lamps - E39 Mogul Base - 4000K Cool White - 360 Degree Beam - 50,000 Hour Rating - 6,500 Lumens - Retrofit LED Bulbs For HID Fixtures - Replaces 250w HPS or MH Bulbs.
Well, perhaps the best way, if access allows, new wire can be run that has a ground.
At the entrance box (where your fuses or breakers are), the ground wire will attach to the grounding bar, which in many cases is the same as, or connected to, the neutral bar.
In fact, one of the first utilities you'll want to get connected on your construction site is power.